模板:Infobox settlement/sandbox/doc

This template is aliased or used as a sub-template for several infobox front-end templates. It should be used to produce an Infobox for human settlements (cities, towns, villages, communities) as well as other administrative districts, counties, provinces, et cetera—in fact, any subdivision below the level of a country, for which {{Infobox country}} should be used. Parameters are described in the table below. For questions, see the talk page. For a U.S. city guideline, see WP:USCITIES.

Usage

  • Important: Please enter all numeric values in a raw, unformatted fashion. References are to be included in their respective section footnotes field. Numeric values that are not "raw" may create an "Expression error". Raw values will be automatically formatted by the template. If you find a raw value is not formatted in your usage of the template, please post a notice on the discussion page for this template.
  • An expression error may also occur when any coordinate parameter has a value, but one or more coordinate parameters are blank or invalid.

Basic blank template, ready to cut and paste. See the next section for a copy of the template with all parameters and comments. See the table below that for a full description of each parameter.

Using metric units

{{Infobox settlement
| name                    = 
| native_name             = 
| native_name_lang        = <!-- ISO 639-2 code e.g. "fr" for French. If more than one, use {{lang}} instead -->
| settlement_type         = 
| image_skyline           = 
| image_alt               = 
| image_caption           = 
| image_flag              = 
| flag_alt                = 
| image_seal              = 
| seal_alt                = 
| image_shield            = 
| shield_alt              = 
| etymology               = 
| nickname                = 
| motto                   = 
| image_map               = 
| map_alt                 = 
| map_caption             = 
| pushpin_map             = 
| pushpin_label_position  = 
| pushpin_map_alt         = 
| pushpin_map_caption     = 
| coordinates             = <!-- {{Coord}} -->
| coor_pinpoint           = 
| coordinates_type        = 
| coordinates_footnotes   = 
| coordinates_region      = 
| subdivision_type        = Country
| subdivision_name        = 
| subdivision_type1       = 
| subdivision_name1       = 
| subdivision_type2       = 
| subdivision_name2       = 
| subdivision_type3       = 
| subdivision_name3       = 
| established_title       = 
| established_date        = 
| founder                 = 
| seat_type               = 
| seat                    = 
| government_footnotes    = 
| leader_party            = 
| leader_title            = 
| leader_name             = 
| unit_pref               = Metric
<!-- ALL fields with measurements have automatic unit conversion -->
<!-- for references: use <ref> tags -->
| area_footnotes          = 
| area_urban_footnotes    = <!-- <ref> </ref> -->
| area_rural_footnotes    = <!-- <ref> </ref> -->
| area_metro_footnotes    = <!-- <ref> </ref> -->
| area_magnitude          = <!-- <ref> </ref> -->
| area_note               = 
| area_water_percent      = 
| area_rank               = 
| area_blank1_title       = 
| area_blank2_title       = 
<!-- square kilometers -->
| area_total_km2          = 
| area_land_km2           = 
| area_water_km2          = 
| area_urban_km2          = 
| area_rural_km2          = 
| area_metro_km2          = 
| area_blank1_km2         = 
| area_blank2_km2         = 
<!-- hectares -->
| area_total_ha           = 
| area_land_ha            = 
| area_water_ha           = 
| area_urban_ha           = 
| area_rural_ha           = 
| area_metro_ha           = 
| area_blank1_ha          = 
| area_blank2_ha          = 
| length_km               = 
| width_km                = 
| dimensions_footnotes    = 
| elevation_footnotes     = 
| elevation_m             = 
| population_as_of        = 
| population_footnotes    = 
| population_total        = 
| population_density_km2  = auto
| population_note         = 
| population_demonym      = 
| timezone1               = 
| utc_offset1             = 
| timezone1_DST           = 
| utc_offset1_DST         = 
| postal_code_type        = 
| postal_code             = 
| area_code_type          = 
| area_code               = 
| iso_code                = 
| website                 = <!-- {{URL|example.com}} -->
| footnotes               = 
}}

Using non-metric units

{{Infobox settlement
| name                    = 
| native_name             = 
| native_name_lang        = <!-- ISO 639-2 code e.g. "fr" for French. If more than one, use {{lang}} instead -->
| settlement_type         = 
| image_skyline           = 
| image_alt               = 
| image_caption           = 
| image_flag              = 
| flag_alt                = 
| image_seal              = 
| seal_alt                = 
| image_shield            = 
| shield_alt              = 
| etymology               = 
| nickname                = 
| motto                   = 
| image_map               = 
| map_alt                 = 
| map_caption             = 
| pushpin_map             = 
| pushpin_label_position  = 
| pushpin_map_alt         = 
| pushpin_map_caption     = 
| coordinates             = <!-- {{Coord}} -->
| coor_pinpoint           = 
| coordinates_type        = 
| coordinates_footnotes   = 
| coordinates_region      = 
| subdivision_type        = Country
| subdivision_name        = 
| subdivision_type1       = 
| subdivision_name1       = 
| subdivision_type2       = 
| subdivision_name2       = 
| subdivision_type3       = 
| subdivision_name3       = 
| established_title       = 
| established_date        = 
| founder                 = 
| seat_type               = 
| seat                    = 
| government_footnotes    = 
| leader_party            = 
| leader_title            = 
| leader_name             = 
| unit_pref               = US<!-- or UK -->
<!-- ALL fields with measurements have automatic unit conversion -->
<!-- for references: use <ref> tags -->
| area_footnotes          = 
| area_urban_footnotes    = <!-- <ref> </ref> -->
| area_rural_footnotes    = <!-- <ref> </ref> -->
| area_metro_footnotes    = <!-- <ref> </ref> -->
| area_magnitude          = <!-- use only to set a special wikilink -->
| area_note               = 
| area_water_percent      = 
| area_rank               = 
| area_blank1_title       = 
| area_blank2_title       = 
<!-- square miles --> 
| area_total_sq_mi        = 
| area_land_sq_mi         = 
| area_water_sq_mi        = 
| area_urban_sq_mi        = 
| area_rural_sq_mi        = 
| area_metro_sq_mi        = 
| area_blank1_sq_mi       = 
| area_blank2_sq_mi       = 
<!-- acres -->
| area_total_acre         = 
| area_land_acre          = 
| area_water_acre         = 
| area_urban_acre         = 
| area_rural_acre         = 
| area_metro_acre         = 
| area_blank1_acre        = 
| area_blank2_acre        = 
| length_mi               = 
| width_mi                = 
| dimensions_footnotes    = 
| elevation_footnotes     = 
| elevation_ft            = 
| population_as_of        = 
| population_footnotes    = 
| population_total        = 
| population_density_sq_mi= auto
| population_note         = 
| population_demonym      = 
| timezone1               = 
| utc_offset1             = 
| timezone1_DST           = 
| utc_offset1_DST         = 
| postal_code_type        = 
| postal_code             = 
| area_code_type          = 
| area_code               = 
| iso_code                = 
| website                 = <!-- {{URL|example.com}} -->
| footnotes               = 
}}

Short version

{{Infobox settlement
| name                    = 
| native_name             = 
| native_name_lang        = <!-- ISO 639-2 code e.g. "fr" for French. If more than one, use {{lang}} instead -->
| settlement_type         = 
| image_skyline           = 
| image_alt               = 
| image_caption           = 
| etymology               = 
| nickname                = 
| coordinates             = <!-- {{Coord}} -->
| coordinates_type        = 
| coordinates_region      = 
| subdivision_type        = Country
| subdivision_name        = 
| subdivision_type1       = 
| subdivision_name1       = 
| subdivision_type2       = 
| subdivision_name2       = 
| website                 = <!-- {{URL|example.com}} -->
}}

Complete empty syntax, with comments

This copy of the template lists all parameters except for some of the repeating numbered parameters which are noted in the comments. Comments here should be brief; see the table below for full descriptions of each parameter.

{{Infobox settlement
| name                    = <!-- at least one of the first two fields must be filled in -->
| official_name           =
| native_name             = <!-- if different from the English name -->
| native_name_lang        = <!-- ISO 639-2 code e.g. "fr" for French. If more than one, use {{lang}} instead -->
| other_name              =
| settlement_type         = <!-- such as Town, Village, City, Borough etc. -->
<!-- transliteration(s) -->
| translit_lang1          =
| translit_lang1_type     =
| translit_lang1_info     =
| translit_lang1_type1    =
| translit_lang1_info1    =
| translit_lang1_type2    =
| translit_lang1_info2    = <!-- etc., up to translit_lang1_type6 / translit_lang1_info6 -->
| translit_lang2          =
| translit_lang2_type     =
| translit_lang2_info     =
| translit_lang2_type1    =
| translit_lang2_info1    =
| translit_lang2_type2    =
| translit_lang2_info2    = <!-- etc., up to translit_lang2_type6 / translit_lang2_info6 -->
<!-- images, nickname, motto -->
| image_skyline           =
| imagesize               =
| image_alt               =
| image_caption           =
| image_flag              =
| flag_size               =
| flag_alt                =
| flag_border             =
| flag_link               =
| image_seal              =
| seal_size               =
| seal_alt                =
| seal_link               =
| seal_type               =
| image_shield            =
| shield_size             =
| shield_alt              =
| shield_link             =
| image_blank_emblem      =
| blank_emblem_type       = <!-- defaults to Logo -->
| blank_emblem_size       =
| blank_emblem_alt        =
| blank_emblem_link       =
| etymology               = 
| nickname                =
| motto                   =
| anthem                  =
<!-- maps and coordinates -->
| image_map               =
| mapsize                 =
| map_alt                 =
| map_caption             =
| image_map1              =
| mapsize1                =
| map_alt1                =
| map_caption1            =
| pushpin_map             = <!-- name of a location map as per Template:Location_map -->
| pushpin_label_position  = <!-- position of the pushpin label: left, right, top, bottom, none -->
| pushpin_label           = <!-- only necessary if "name" or "official_name" are too long -->
| pushpin_map_alt         =
| pushpin_mapsize         =
| pushpin_relief          =
| pushpin_map_caption     =
| coordinates             = <!-- {{Coord}} -->
| coor_pinpoint           = <!-- to specify exact location of coordinates (was coor_type) -->
| coordinates_region      = <!-- ISO 3166-1 alpha-2 or ISO 3166-2 code for country/region containing the coordinates -->
| coordinates_type        = <!-- parameter list passed to Coord template, overrides coordinates_region -->
| coordinates_wikidata    = yes
| coordinates_footnotes   = <!-- for references: use <ref> tags -->
| grid_name               = <!-- name of a regional grid system -->
| grid_position           = <!-- position on the regional grid system -->
<!-- location -->
| subdivision_type        = Country
| subdivision_name        = <!-- the name of the country -->
| subdivision_type1       =
| subdivision_name1       =
| subdivision_type2       =
| subdivision_name2       = <!-- etc., subdivision_type6 / subdivision_name6 -->
<!-- established -->
| established_title       = <!-- Founded -->
| established_date        =
| established_title1      = <!-- Incorporated (town) -->
| established_date1       =
| established_title2      = <!-- Incorporated (city) -->
| established_date2       =
| established_title3      =
| established_date3       =
| established_title4      =
| established_date4       =
| established_title5      =
| established_date5       =
| established_title6      =
| established_date6       =
| established_title7      =
| established_date7       =
| extinct_title           =
| extinct_date            =
| founder                 =
| named_for               =
<!-- seat, smaller parts -->
| seat_type               = <!-- defaults to: Seat -->
| seat                    =
| seat1_type              = <!-- defaults to: Former seat -->
| seat1                   =
| parts_type              = <!-- defaults to: Boroughs -->
| parts_style             = <!-- list, coll (collapsed list), para (paragraph format) -->
| parts                   = <!-- parts text, or header for parts list -->
| p1                      =
| p2                      = <!-- etc., up to p50: for separate parts to be listed-->
<!-- government type, leaders -->
| government_footnotes    = <!-- for references: use <ref> tags -->
| government_type         =
| governing_body          =
| leader_party            =
| leader_title            =
| leader_name             = <!-- add &nbsp; (no-break space) to disable automatic links -->
| leader_title1           =
| leader_name1            = <!-- etc., up to leader_title4 / leader_name4 -->
<!-- display settings -->
| total_type              = <!-- to set a non-standard label for total area and population rows -->
| unit_pref               = <!-- enter: Imperial, to display imperial before metric -->
<!-- area -->
| area_footnotes          = <!-- for references: use <ref> tags -->
| area_magnitude          = <!-- use only to set a special wikilink -->
| dunam_link              = <!-- If dunams are used, this specifies which dunam to link. -->
| area_total_km2          = <!-- ALL fields with measurements have automatic unit conversion -->
| area_total_sq_mi        = <!-- see table @ Template:Infobox settlement for details -->
| area_total_ha           =
| area_total_acre         =
| area_total_dunam        = <!-- used in Middle East articles only -->
| area_land_km2           =
| area_land_sq_mi         =
| area_land_ha            =
| area_land_acre          =
| area_land_dunam         = <!-- used in Middle East articles only -->
| area_water_km2          =
| area_water_sq_mi        =
| area_water_ha           =
| area_water_acre         =
| area_water_dunam        = <!-- used in Middle East articles only -->
| area_water_percent      =
| area_urban_footnotes    = <!-- for references: use <ref> tags -->
| area_urban_km2          =
| area_urban_sq_mi        =
| area_urban_ha           =
| area_urban_acre         =
| area_urban_dunam        = <!-- used in Middle East articles only -->
| area_rural_footnotes    = <!-- for references: use <ref> tags -->
| area_rural_km2          =
| area_rural_sq_mi        =
| area_rural_ha           =
| area_rural_acre         =
| area_rural_dunam        = <!-- used in Middle East articles only -->
| area_metro_footnotes    = <!-- for references: use <ref> tags -->
| area_metro_km2          =
| area_metro_sq_mi        =
| area_metro_ha           =
| area_metro_acre         =
| area_metro_dunam        = <!-- used in Middle East articles only -->
| area_rank               =
| area_blank1_title       =
| area_blank1_km2         =
| area_blank1_sq_mi       =
| area_blank1_ha          =
| area_blank1_acre        =
| area_blank1_dunam       = <!-- used in Middle East articles only -->
| area_blank2_title       =
| area_blank2_km2         =
| area_blank2_sq_mi       =
| area_blank2_ha          =
| area_blank2_acre        =
| area_blank2_dunam       = <!-- used in Middle East articles only -->
| area_note               =
<!-- dimensions -->
| dimensions_footnotes    = <!-- for references: use <ref> tags -->
| length_km               =
| length_mi               =
| width_km                =
| width_mi                =
<!-- elevation -->
| elevation_footnotes     = <!-- for references: use <ref> tags -->
| elevation_m             =
| elevation_ft            =
| elevation_point         = <!-- for denoting the measurement point -->
| elevation_max_footnotes = <!-- for references: use <ref> tags -->
| elevation_max_m         =
| elevation_max_ft        =
| elevation_max_point     = <!-- for denoting the measurement point -->
| elevation_max_rank      =
| elevation_min_footnotes = <!-- for references: use <ref> tags -->
| elevation_min_m         =
| elevation_min_ft        =
| elevation_min_point     = <!-- for denoting the measurement point -->
| elevation_min_rank      =
<!-- population -->
| population_as_of        =
| population_footnotes    = <!-- for references: use <ref> tags -->
| population_total        =
| pop_est_as_of           =
| pop_est_footnotes       =
| population_est          =
| population_rank         =
| population_density_km2  = <!-- for automatic calculation of any density field, use: auto -->
| population_density_sq_mi=
| population_urban_footnotes     =
| population_urban               =
| population_density_urban_km2   =
| population_density_urban_sq_mi =
| population_rural_footnotes     =
| population_rural               =
| population_density_rural_km2   =
| population_density_rural_sq_mi =
| population_metro_footnotes     =
| population_metro               =
| population_density_metro_km2   =
| population_density_metro_sq_mi =
| population_density             =
| population_density_rank        =
| population_blank1_title        =
| population_blank1              =
| population_density_blank1_km2  =
| population_density_blank1_sq_mi=
| population_blank2_title        =
| population_blank2              =
| population_density_blank2_km2  =
| population_density_blank2_sq_mi=
| population_demonym      = <!-- demonym, e.g. Liverpudlian for someone from Liverpool -->
| population_note         =
<!-- demographics (section 1) -->
| demographics_type1      =
| demographics1_footnotes = <!-- for references: use <ref> tags -->
| demographics1_title1    =
| demographics1_info1     = <!-- etc., up to demographics1_title5 / demographics1_info5 -->
<!-- demographics (section 2) -->
| demographics_type2      =
| demographics2_footnotes = <!-- for references: use <ref> tags -->
| demographics2_title1    =
| demographics2_info1     = <!-- etc., up to demographics2_title5 / demographics2_info5 -->
<!-- time zone(s) -->
| timezone1               =
| utc_offset1             =
| timezone1_DST           =
| utc_offset1_DST         =
| timezone2               =
| utc_offset2             =
| timezone2_DST           =
| utc_offset2_DST         =
<!-- postal codes, area code -->
| postal_code_type        = <!-- enter ZIP code, Postcode, Post code, Postal code... -->
| postal_code             =
| postal2_code_type       = <!-- enter ZIP code, Postcode, Post code, Postal code... -->
| postal2_code            =
| area_code_type          = <!-- defaults to: Area code(s) -->
| area_code               =
| geocode                 =
| iso_code                =
| registration_plate_type =
| registration_plate      =
<!-- blank fields (section 1) -->
| blank_name_sec1         =
| blank_info_sec1         =
| blank1_name_sec1        =
| blank1_info_sec1        =
| blank2_name_sec1        =
| blank2_info_sec1        = <!-- etc., up to blank7_name_sec1 / blank7_info_sec1 -->
<!-- blank fields (section 2) -->
| blank_name_sec2         =
| blank_info_sec2         =
| blank1_name_sec2        =
| blank1_info_sec2        =
| blank2_name_sec2        =
| blank2_info_sec2        = <!-- etc., up to blank7_name_sec2 / blank7_info_sec2 -->
<!-- website, footnotes -->
| website                 = <!-- {{URL|example.com}} -->
| footnotes               =
}}

Parameter names and descriptions

Name and transliteration

Parameter name Usage Description
name optional This is the usual name in English. If it's not specified, the infobox will use the official_name as a title unless this too is missing, in which case the page name will be used.
official_name optional The official name in English if different from name
native_name optional Name in the local language, if different from name, and if not English. This will display under the name/official name
native_name_lang optional Use ISO 639-2 code, e.g. "fr" for French. If there is more than one native name, in different languages, enter those names using {{lang}}, instead.
other_name optional For places with a former or more common name like Bombay or Saigon
settlement_type optional Any type can be entered, such as City, Town, Village, Hamlet, Municipality, Reservation, etc. If set, will be displayed under the names, provided that either name or official_name is filled in. Might also be used as a label for total population/area (defaulting to City), if needed to distinguish from Urban, Rural or Metro (if urban, rural or metro figures are not present, the label is Total unless total_type is set).
Transliteration(s)
translit_lang1 optional Will place the "entry" before the word "transliteration(s)". Can be used to specify a particular language like in Dêlêg or one may just enter "Other", like in Gaza's article.
translit_lang1_type
translit_lang1_type1
to
translit_lang1_type6
optional
translit_lang1_info
translit_lang1_info1
to
translit_lang1_info6
optional
translit_lang2 optional Will place a second transliteration. See Dêlêg
translit_lang2_type
translit_lang2_type1
to
translit_lang2_type6
optional
translit_lang2_info
translit_lang2_info1
to
translit_lang2_info6
optional

Images, nickname, motto

Parameter name Usage Description
Skyline image
image_skyline optional Despite the name it can be any image that an editor wishes.
imagesize optional Can be used to tweak the size of the image_skyline up or down. This can be helpful if an editor wants to make the infobox wider. If used, px must be specified; default size is 250px.
image_alt optional Alt text for the image, used by visually impaired readers who cannot see the image. See WP:ALT.
image_caption optional Will place a caption under the image_skyline (if present)
Flag image
image_flag optional Used for a flag.
flag_size optional Can be used to tweak the size of the image_flag up or down from 100px as desired. If used, px must be specified; default size is 100px.
flag_alt optional Alt text for the flag.
flag_border optional Set to 'no' to remove the border from the flag
flag_link optional
Seal image
image_seal optional If the place has an official seal.
seal_size optional If used, px must be specified; default size is 100px.
seal_alt optional Alt text for the seal.
seal_link
seal_type
optional
Coat of arms image
image_shield optional Can be used for a place with a coat of arms.
shield_size optional If used, px must be specified; default size is 100px.
shield_alt optional Alt text for the shield.
shield_link optional Can be used if a wiki article if known but is not automatically linked by the template. See Coquitlam, British Columbia's infobox for an example.
Logo or emblem image
image_blank_emblem optional Can be used if a place has an official logo, crest, emblem, etc. Logo is the default type. See Kingston upon Hull's infobox for an example.
blank_emblem_type optional To specify what type of emblem "image_blank_emblem" is. The default is Logo.
blank_emblem_size optional If used, px must be specified; default size is 100px.
blank_emblem_alt optional Alt text for blank emblem.
blank_emblem_link optional
Nickname, motto
etymology optional origin of name
nickname optional well-known nickname(s)
motto optional Will place the motto under the nicknames
anthem optional Will place the anthem (song) under the nicknames

Maps, coordinates

Parameter name Usage Description
Map images
image_map optional
mapsize optional If used, px must be specified; default is 250px.
map_alt optional Alt text for map.
map_caption optional
image_map1 optional A secondary map image. The field image_map must be filled in first. Example see: Bloomsburg, Pennsylvania.
mapsize1 optional If used, px must be specified; default is 250px.
map_alt1 optional Alt text for secondary map.
map_caption1 optional
Pushpin map(s), coordinates
pushpin_map optional The name of a location map as per Template:Location map (e.g. Indonesia or Russia). The coordinate fields (from |coordinates=) position a pushpin coordinate marker and label on the map automatically. Example: Padang, Indonesia. To show multiple pushpin maps, provide a list of maps separated by #, e.g., California#USA
pushpin_label_position optional The position of the label on the pushpin map relative to the pushpin coordinate marker. Valid options are {left, right, top, bottom, none}. If this field is not specified, the default value is right.
pushpin_map_alt optional Alt text for pushpin map.
pushpin_mapsize optional Must be entered as only a number—do not use px. The default value is 250.
pushpin_map_caption optional Fill out if a different caption from map_caption is desired.
pushpin_relief optional Set this to y or any non-blank value to use an alternative relief map provided by the selected location map (if a relief map is available).
pushpin_overlay optional Can be used to specify an image to be superimposed on the regular pushpin map.
coordinates optional Latitude and longitude. Use {{Coord}}. See the documentation for {{Coord}} for more details on usage.
coor_pinpoint optional If needed, to specify more exactly where (or what) coordinates are given (e.g. Town Hall) or a specific place in a larger area (e.g. a city in a county). Example: Masovian Voivodeship
coordinates_region optional Can be used to override the default region: for the coordinates. Use either a two character ISO 3166-1二位字母代碼 country code or an ISO 3166-2 region code.

If coordinates_region is omitted or blank, region: will be set according to subdivision_name, using {{Country abbreviation}}. For example, subdivision_name = United Kingdom will generate coordinates with "region:GB". In addition, wherever possible, subdivision_name1 will be used to determine the region. For example: subdivision_name=Canada and subdivision_name1=Ontario will yield "region:CA-ON".
coordinates_type (below) overrides this parameter.

coordinates_type optional Can be used to override the default coordinate parameters for the coordinates. May include type:, scale:, dim:, region:, and/or source:, joined by underscores ("_").

If |coordinates_type= is omitted or blank:

  • scale:, dim:, and source: will be left unspecified.
  • region: will be set by |coordinates_region= (above), |subdivision_name= and |subdivision_name1= (below), and
  • type: will be set to "type:city" if the population_total field is omitted or blank. If population_total is a number without commas, "type:city(population_total)" is used. But if population_total includes letters or punctuation, "type:city" is used.
coordinates_footnotes optional Reference(s) for coordinates, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
coordinates_wikidata optional If the parameter is set to any non-blank value, and the |coordinates= parameter is blank/omitted, and the coordinates are on the corresponding wikidata page, then the coordinates will be pulled from wikidata.
grid_name
grid_position
optional Name of a regional grid system and position on the regional grid

Location, established, seat, subdivisions, government, leaders

Parameter name Usage Description
Location
subdivision_type optional almost always Country
subdivision_name optional Depends on the subdivision_type—use the name in text form, sample: United States or United States, flag icons or flag templates can be used in this field.
subdivision_type1
to
subdivision_type6
optional Can be State/Province, region, county.
subdivision_name1
to
subdivision_name6
optional Use the name in text form, sample: Florida or [[Florida]]. Flag icons or flag templates can be used in this field per WP:MOSFLAG.
Established
established_title optional Example: Founded
established_date optional
established_title1 optional Example: Incorporated (town)
[Note that "established_title1" is distinct from "established_title"; you can think of "established_title" as behaving like "established_title0".]
established_date1 optional [See note for "established_title1".]
established_title2 optional Example: Incorporated (city)
established_date2 optional
established_title3 optional
established_date3 optional
established_title4 optional
established_date4 optional
established_title5 optional
established_date5 optional
established_title6 optional
established_date6 optional
established_title7 optional
established_date7 optional
extinct_title optional For when a settlement ceases to exist
extinct_date optional
founder optional Who the settlement was founded by
named_for optional The source of the name of the settlement (a person, a place, et cetera)
Seat of government
seat_type optional The label for the seat of government (defaults to Seat).
seat optional The seat of government.
Smaller parts (e.g. boroughs of a city)
parts_type optional The label for the smaller subdivisions (defaults to Boroughs).
parts_style optional Set to list to display as a collapsible list, coll as a collapsed list, or para to use paragraph style. Default is list for up to 5 items, otherwise coll.
parts optional Text or header of the list of smaller subdivisions.
p1
p2
to
p50
optional The smaller subdivisions to be listed. Example: Warsaw
Government type, leaders
government_footnotes optional Reference(s) for government, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
government_type optional Example: Mayor-council government
governing_body optional Name of the place's governing body
leader_party optional Political party of the place's leader
leader_title optional First title of the place's leader, e.g. Mayor
leader_name optional Name of the place's leader
leader_title1
to
leader_title4
optional
leader_name1
to
leader_name4
optional For long lists use {{Collapsible list}}. See Halifax for an example.

Geographic information

These fields have dual automatic unit conversion meaning that if only metric values are entered, the imperial values will be automatically converted and vice versa. If an editor wishes to over-ride the automatic conversion, e.g. if the source gives both metric and imperial or if a range of values is needed, they should enter both values in their respective fields.
Parameter name Usage Description
Display settings
total_type optional Specifies what "total" area and population figure refer to, e.g. Greater London. This overrides other labels for total population/area. To make the total area and population display on the same line as the words "Area" and "Population", with no "Total" or similar label, set the value of this parameter to  .
unit_pref optional To change the unit order to imperial (metric), enter imperial. The default display style is metric (imperial). However, the template will swap the order automatically if the subdivision_name equals some variation of the USA or the UK.
For the middle east, a unit preference of dunam can be entered (only affects total area).
All values must be entered in a raw format: no commas, spaces, or unit symbols. The template will format them automatically.
Area
area_footnotes optional Reference(s) for area, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
area_magnitude optional Setting this to any non-empty value will create a link to the appropriate order of magnitude of area page (e.g. 1 E+6 m²).
dunam_link optional If dunams are used, the default is to link the word dunams in the total area section. This can be changed by setting dunam_link to another measure (e.g. dunam_link=water). Linking can also be turned off by setting the parameter to something else (e.g. dunam_link=none or dunam_link=off).
area_total_km2 optional Total area in square kilometers—symbol: km2. Value must be entered in raw format, no commas or spaces. Auto-converted to display square miles if area_total_sq_mi is empty.
area_total_ha optional Total area in hectares—symbol: ha. Value must be entered in raw format, no commas or spaces. Auto-converted to display acres if area_total_acre is empty.
area_total_sq_mi optional Total area in square miles—symbol: sq mi. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers if area_total_km2 is empty.
area_total_acre optional Total area in acres. Value must be entered in raw format, no commas or spaces. Auto-converted to display hectares if area_total_ha is empty.
area_total_dunam optional Total area in dunams, which is wiki-linked. Used in middle eastern places like Israel, Gaza, and the West Bank. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers or hectares and square miles or acreds if area_total_km2, area_total_ha, area_total_sq_mi, and area_total_acre are empty. Examples: Gaza and Ramallah
area_land_km2 optional Land area in square kilometers—symbol: km2. Value must be entered in raw format, no commas or spaces. Auto-converted to display square miles if area_land_sq_mi is empty.
area_land_sq_mi optional Land area in square miles—symbol: sq mi. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers if area_land_km2 is empty.
area_land_ha optional similar to area_total_ha
area_land_dunam optional similar to area_total_dunam
area_land_acre optional similar to area_total_acre
area_water_km2 optional Water area in square kilometers—symbol: km2. Value must be entered in raw format, no commas or spaces. Auto-converted to display square miles if area_water_sq_mi is empty.
area_water_sq_mi optional Water area in square miles—symbol: sq mi. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers if area_water_km2 is empty.
area_water_ha optional similar to area_total_ha
area_water_dunam optional similar to area_total_dunam
area_water_acre optional similar to area_total_acre
area_water_percent optional percent of water without the "%"
area_urban_km2 optional
area_urban_sq_mi optional
area_urban_ha optional similar to area_total_ha
area_urban_dunam optional similar to area_total_dunam
area_urban_acre optional similar to area_total_acre
area_rural_km2 optional
area_rural_sq_mi optional
area_rural_ha optional similar to area_total_ha
area_rural_dunam optional similar to area_total_dunam
area_rural_acre optional similar to area_total_acre
area_metro_km2 optional
area_metro_sq_mi optional
area_metro_ha optional similar to area_total_ha
area_metro_dunam optional similar to area_total_dunam
area_metro_acre optional similar to area_total_acre
area_rank optional The settlement's area, as ranked within its parent sub-division
area_blank1_title optional Example see London
area_blank1_km2 optional
area_blank1_sq_mi optional
area_blank1_ha optional similar to area_total_ha
area_blank1_dunam optional similar to area_total_dunam
area_blank1_acre optional similar to area_total_acre
area_blank2_title optional
area_blank2_km2 optional
area_blank2_sq_mi optional
area_blank2_ha optional similar to area_total_ha
area_blank2_dunam optional similar to area_total_dunam
area_blank2_acre optional similar to area_total_acre
area_note optional A place for additional information such as the name of the source.
Dimensions
dimensions_footnotes optional Reference(s) for dimensions, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
length_km optional Raw number entered in kilometers. Will automatically convert to display length in miles if length_mi is empty.
length_mi optional Raw number entered in miles. Will automatically convert to display length in kilometers if length_km is empty.
width_km optional Raw number entered in kilometers. Will automatically convert to display width in miles if length_mi is empty.
width_mi optional Raw number entered in miles. Will automatically convert to display width in kilometers if length_km is empty.
Elevation
elevation_footnotes optional Reference(s) for elevation, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
elevation_m optional Raw number entered in meters. Will automatically convert to display elevation in feet if elevation_ft is empty. However, if a range in elevation (i.e. 5–50 m ) is desired, use the "max" and "min" fields below
elevation_ft optional Raw number, entered in feet. Will automatically convert to display the average elevation in meters if elevation_m field is empty. However, if a range in elevation (e.g. 50–500 ft ) is desired, use the "max" and "min" fields below
elevation_max_footnotes
elevation_min_footnotes
optional Same as above, but for the "max" and "min" elevations. See Leeds.
elevation_max_m
elevation_max_ft
elevation_max_rank
elevation_min_m
elevation_min_ft
elevation_min_rank
optional Used to give highest & lowest elevations and rank, instead of just a single value. Example: Halifax Regional Municipality.

Population, demographics

The density fields have dual automatic unit conversion meaning that if only metric values are entered, the imperial values will be automatically converted and vice versa. If an editor wishes to over-ride the automatic conversion, e.g. if the source gives both metric and imperial or if a range of values is needed, they can enter both values in their respective fields. To calculate density with respect to the total area automatically, type auto in place of any density value.
Parameter name Usage Description
Population
population_total optional Actual population (see below for estimates) preferably consisting of digits only (without any commas)
population_as_of optional The year for the population total (usually a census year)
population_footnotes optional Reference(s) for population, placed within <ref> </ref> tags
population_density_km2 optional
population_density_sq_mi optional
population_est optional Population estimate.
pop_est_as_of optional The year or month & year of the population estimate
pop_est_footnotes optional Reference(s) for population estimate, placed within <ref> </ref> tags
population_urban optional
population_urban_footnotes optional Reference(s) for urban population, placed within <ref> </ref> tags
population_density_urban_km2 optional
population_density_urban_sq_mi optional
population_rural optional
population_rural_footnotes optional Reference(s) for rural population, placed within <ref> </ref> tags
population_density_rural_km2 optional
population_density_rural_sq_mi optional
population_metro optional
population_metro_footnotes optional Reference(s) for metro population, placed within <ref> </ref> tags
population_density_metro_km2 optional
population_density_metro_sq_mi optional
population_rank optional The settlement's population, as ranked within its parent sub-division
population_density_rank optional The settlement's population density, as ranked within its parent sub-division
population_blank1_title optional Can be used for estimates. Example: Windsor, Ontario
population_blank1 optional The population value for blank1_title
population_density_blank1_km2 optional
population_density_blank1_sq_mi optional
population_blank2_title optional
population_blank2 optional
population_density_blank2_km2 optional
population_density_blank2_sq_mi optional
population_demonym optional A demonym or gentilic is a word that denotes the members of a people or the inhabitants of a place. For example, a citizen in Liverpool is known as a Liverpudlian.
population_note optional A place for additional information such as the name of the source. See Windsor, Ontario for example.
Demographics (section 1)
demographics_type1 optional Section Header. For example: Ethnicity
demographics1_footnotes optional Reference(s) for demographics section 1, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
demographics1_title1
to
demographics1_title5
optional Titles related to demographics_type1. For example: White, Black, Hispanic...
demographics1_info1
to
demographics1_info5
optional Information related to the "titles". For example: 50%, 25%, 10%...
Demographics (section 2)
demographics_type2 optional A second section header. For example: Languages
demographics2_footnotes optional Reference(s) for demographics section 2, placed within <ref> </ref> tags, possibly using the citing format at {{Cite web}}
demographics2_title1
to
demographics2_title5
optional Titles related to demographics_type2. For example: English, French, Arabic...
demographics2_info1
to
demographics2_info5
optional Information related to the "titles" for type2. For example: 50%, 25%, 10%...

Other information

Parameter name Usage Description
Time zone(s)
timezone1 optional
utc_offset1 optional
timezone1_DST optional
utc_offset1_DST optional
timezone2 optional A second timezone field for larger areas such as a Province.
utc_offset2 optional
timezone2_DST optional
utc_offset2_DST optional
Postal code(s) & area code
postal_code_type optional
postal_code optional
postal2_code_type optional
postal2_code optional
area_code_type optional If left blank/not used template will default to "Area code(s)"
area_code optional
geocode optional See Geocode
iso_code optional See ISO 3166
registration_plate_type optional If left blank/not used template will default to "Vehicle registration"
registration_plate optional See Vehicle registration plate
Blank fields (section 1)
blank_name_sec1 optional Fields used to display other information. The name is displayed in bold on the left side of the infobox.
blank_info_sec1 optional The information associated with the blank_name heading. The info is displayed on right side of infobox, in the same row as the name. For an example, see: Warsaw
blank1_name_sec1
to
blank7_name_sec1
optional Up to 7 additional fields (8 total) can be displayed in this section
blank1_info_sec1
to
blank7_info_sec1
optional
Blank fields (section 2)
blank_name_sec2 optional For a second section of blank fields
blank_info_sec2 optional Example: Beijing
blank1_name_sec2
to
blank7_name_sec2
optional Up to 7 additional fields (8 total) can be displayed in this section
blank1_info_sec2
to
blank7_info_sec2
optional
Website, footnotes
website optional External link to official website, Use {{URL}}, thus: {{URL|example.com}}
footnotes optional Text to be displayed at the bottom of the infobox

Examples

Example 1
Chicago
City
Clockwise from top: Downtown Chicago, the Chicago Theatre, the Chicago 'L', Navy Pier, Millennium Park, the Field Museum, and the Willis (formerly Sears) Tower
Chicago旗幟
旗幟
Chicago官方圖章
圖章
詞源:Template:Lang-mia ("wild onion" or "wild garlic")
綽號:The Windy City, The Second City, Chi-Town, Chi-City, Hog Butcher for the World, City of the Big Shoulders, The City That Works, and others found at List of nicknames for Chicago
格言:拉丁語Urbs in Horto (City in a Garden), Make Big Plans (Make No Small Plans), I Will
Location in the Chicago metropolitan area and Illinois
Location in the Chicago metropolitan area and Illinois
Chicago在美國的位置
Chicago
Chicago
Location in the United States
坐標:41°50′15″N 87°40′55″W / 41.83750°N 87.68194°W / 41.83750; -87.68194[1]
CountryUnited States
StateIllinois
CountiesCook, DuPage
Settled1770s
IncorporatedMarch 4, 1837
語源Template:Lang-mia
("Wild onion")
政府
 • 類型Mayor–council
 • MayorRahm EmanuelD
 • CouncilChicago City Council
面積[1]
 • City234.114 平方英里 (600 平方公里)
 • 陸地227.635 平方英里(600 平方公里)
 • 水域6.479 平方英里(20 平方公里)  3%
 • 市區2,123 平方英里(5,000 平方公里)
 • 都會區10,874 平方英里(30,000 平方公里)
海拔[2]594 英尺(181 公尺)
人口2010[3][4]
 • City2,695,598人
 • 估計(2011)2,707,120
 • 排名3rd US
 • 密度11,892.4人/平方英里(4,591.7人/平方公里)
 • 市區8,711,000
 • 市區密度4,103人/平方英里(表達式錯誤:無法識別標點符號「」。人/平方公里)
 • 都會區9,461,105
 • 都會區密度870人/平方英里(336人/平方公里)
居民稱謂Chicagoan
時區CSTUTC−06:00
 • 夏時制CDTUTC−05:00
Area codes312, 773, 872
FIPS code17-14000
GNIS feature ID423587, 428803
網站www.cityofchicago.org
[2]
<!-- NOTE: This differs from the actual Chicago infobox in order to provide examples. -->
{{Infobox settlement
| name = Chicago
| settlement_type = [[City (Illinois)|City]]
| image_skyline = Chicago montage.jpg
| imagesize = 275px <!--default is 250px-->
| image_caption = Clockwise from top: [[Downtown Chicago]], the [[Chicago Theatre]], the [[Chicago 'L']], [[Navy Pier]], [[Millennium Park]], the [[Field Museum]], and the [[Willis Tower|Willis (formerly Sears) Tower]]
| image_flag = Flag of Chicago, Illinois.svg
| image_seal = Seal of Chicago, Illinois.svg
| etymology = {{lang-mia|shikaakwa}} ("wild onion" or "wild garlic")
| nickname = [[Origin of Chicago's "Windy City" nickname|The Windy City]], The Second City, Chi-Town, Chi-City, Hog Butcher for the World, City of the Big Shoulders, The City That Works, and others found at [[List of nicknames for Chicago]]
| motto = {{lang-la|Urbs in Horto}} (''City in a Garden''), Make Big Plans (Make No Small Plans), I Will
| image_map = US-IL-Chicago.png
| map_caption = Location in the [[Chicago metropolitan area]] and Illinois
| pushpin_map = USA
| pushpin_map_caption = Location in the United States
| coordinates = {{coord|41|50|15|N|87|40|55|W}}
| coordinates_footnotes = <ref name="USCB Gazetteer 2010"/>
| subdivision_type = Country
| subdivision_name = United States
| subdivision_type1 = State
| subdivision_name1 = [[Illinois]]
| subdivision_type2 = [[List of counties in Illinois|Counties]]
| subdivision_name2 = [[Cook County, Illinois|Cook]], [[DuPage County, Illinois|DuPage]]
| established_title = Settled
| established_date = 1770s
| established_title2 = [[Municipal corporation|Incorporated]]
| established_date2 = March 4, 1837
| founder =
| named_for = {{lang-mia|shikaakwa}}<br /> ("Wild onion")
| government_type = [[Mayor–council government|Mayor–council]]
| leader_title = [[Mayor of Chicago|Mayor]]
| leader_name = [[Rahm Emanuel]]
| leader_party = [[Democratic Party (United States)|D]]
| leader_title1 = [[City council|Council]]
| leader_name1 = [[Chicago City Council]]
| unit_pref = Imperial
| area_footnotes = <ref name="USCB Gazetteer 2010">{{cite web | url = http://www.census.gov/geo/www/gazetteer/files/Gaz_places_national.txt | title = 2010 United States Census Gazetteer for Places: January 1, 2010 | format = text | work = 2010 United States Census | publisher = [[United States Census Bureau]] | date = April 2010 | accessdate = August 1, 2012}}</ref>
| area_magnitude = 1 E+8
| area_total_sq_mi = 234.114
| area_land_sq_mi  = 227.635
| area_water_sq_mi = 6.479
| area_water_percent = 3
| area_urban_sq_mi = 2123
| area_metro_sq_mi = 10874
| elevation_footnotes = <ref name="GNIS"/>
| elevation_ft = 594
| elevation_m  = 181
| population_as_of = [[2010 United States Census|2010]]
| population_footnotes = <ref name="USCB PopEstCities 2011">{{cite web | url = http://www.census.gov/popest/data/cities/totals/2011/tables/SUB-EST2011-01.csv | title = Annual Estimates of the Resident Population for Incorporated Places Over 50,000, Ranked by July 1, 2011 Population | format = [[comma-separated values|CSV]] | work = 2011 Population Estimates | publisher = [[United States Census Bureau]], Population Division | date = June 2012 | accessdate = August 1, 2012}}</ref><ref name="USCB Metro 2010">{{cite web | url=http://www.census.gov/prod/cen2010/briefs/c2010br-01.pdf | title = Population Change for the Ten Most Populous and Fastest Growing Metropolitan Statiscal Areas: 2000 to 2010 | date = March 2011 | publisher = [[U.S. Census Bureau]] | page = 6 |accessdate = April 12, 2011}}</ref>
| population_total = 2,695,598
| pop_est_as_of = 2011
| population_est = 2,707,120
| population_rank  = [[List of United States cities by population|3rd US]]
| population_density_sq_mi = 11,892.4<!-- 2011 population_est / area_land_sq_mi -->
| population_urban = 8711000
| population_density_urban_sq_mi = auto
| population_metro = 9461105
| population_density_metro_sq_mi = auto
| population_demonym = Chicagoan
| timezone = [[Central Standard Time|CST]]
| utc_offset = −06:00
| timezone_DST = [[Central Daylight Time|CDT]]
| utc_offset_DST = −05:00
| area_code_type = [[North American Numbering Plan|Area codes]]
| area_code = [[Area code 312|312]], [[Area code 773|773]], [[Area code 872|872]]
| blank_name = [[Federal Information Processing Standards|FIPS]] code
| blank_info = {{FIPS|17|14000}}
| blank1_name = [[Geographic Names Information System|GNIS]] feature ID
| blank1_info = {{GNIS4|423587}}, {{GNIS4|428803}}
| website = {{URL|www.cityofchicago.org}}
| footnotes = <ref name="GNIS">{{Cite GNIS|428803|City of Chicago|April 12, 2011}}</ref>
}}
References

Example 2
Detroit
City
City of Detroit
Images from top to bottom, left to right: Downtown Detroit skyline, Spirit of Detroit, Greektown, Ambassador Bridge, Michigan Soldiers' and Sailors' Monument, Fox Theatre, and Comerica Park.
Detroit旗幟
旗幟
Detroit官方圖章
圖章
詞源:法語:détroit (strait)
綽號:The Motor City, Motown, Renaissance City, The D, Hockeytown, The Automotive Capital of the World, Rock City, The 313
格言:Speramus Meliora; Resurget Cineribus
(Latin: We Hope For Better Things; It Shall Rise From the Ashes)
Location within Wayne County, Michigan and the state of Michigan
Location within Wayne County, Michigan and the state of Michigan
Detroit在美國的位置
Detroit
Detroit
坐標:42°19′53″N 83°2′45″W / 42.33139°N 83.04583°W / 42.33139; -83.04583
Country 美國
State 密西根州
CountyWayne
Founded1701
Incorporated1806
政府
 • 類型Mayor-Council
 • MayorDave BingD
 • City Council
面積
 • City142.87 平方英里(370.03 平方公里)
 • 陸地138.75 平方英里(359.36 平方公里)
 • 水域4.12 平方英里(10.67 平方公里)
 • 市區1,295 平方英里(3,000 平方公里)
 • 都會區3,913 平方英里(10,000 平方公里)
海拔600 英尺(200 公尺)
人口(2011)
 • City706,585人
 • 排名18th in U.S.
 • 密度5,142人/平方英里(1,985人/平方公里)
 • 市區3,863,924
 • 都會區4,285,832 (US: 13th)
 • CSA5,207,434 (US: 11th)
居民稱謂Detroiter
時區ESTUTC−5
 • 夏時制EDTUTC−4
電話區號313
FIPS code26-22000
GNIS feature ID1617959, 1626181
網站DetroitMI.gov
{{Infobox settlement
| name                    = Detroit
| settlement_type         = [[City (Michigan)|City]]
| official_name           = City of Detroit
| image_skyline           = Detroit Montage.jpg
| imagesize               = 290px
| image_caption           = Images from top to bottom, left to right: [[Downtown Detroit]] skyline, [[Spirit of Detroit]], [[Greektown Historic District|Greektown]], [[Ambassador Bridge]], [[Michigan Soldiers' and Sailors' Monument]], [[Fox Theatre (Detroit)|Fox Theatre]], and [[Comerica Park]].
| image_flag              = Flag of Detroit, Michigan.svg

| image_seal              = Seal of Detroit, Michigan.svg
| etymology               = {{lang-fr|détroit}} ([[strait]])
| nickname                = The Motor City, Motown, Renaissance City, The D, Hockeytown, The Automotive Capital of the World, Rock City, The 313
| motto                   = ''Speramus Meliora; Resurget Cineribus''<br /><small>([[Latin]]: We Hope For Better Things; It Shall Rise From the Ashes)</small>
| image_map               = Wayne County Michigan Incorporated and Unincorporated areas Detroit highlighted.svg
| mapsize                 = 250x200px
| map_caption             = Location within [[Wayne County, Michigan]] and the state of [[Michigan]]
| pushpin_map             = USA
| pushpin_map_caption     = Location within the [[Contiguous United States|contiguous United States of America]]
| coordinates = {{coord|42|19|53|N|83|2|45|W}}
| coordinates_footnotes   =
| subdivision_type        = Country
| subdivision_name        = {{flagu|United States of America}}
| subdivision_type1       = State
| subdivision_name1       = {{flag|Michigan}}
| subdivision_type2       = [[List of counties in Michigan|County]]
| subdivision_name2       = [[Wayne County, Michigan|Wayne]]
| established_title       = Founded
| established_date        = 1701
| established_title2      = Incorporated
| established_date2       = 1806
| government_footnotes    = <!-- for references: use<ref> tags -->
| government_type         = [[Mayor-council government|Mayor-Council]]
| leader_title            = [[List of mayors of Detroit, Michigan|Mayor]]
| leader_name             = [[Dave Bing]]
| leader_party            = [[Democratic Party (United States)|D]]
| leader_title1           = [[Detroit City Council|City Council]]
| leader_name1            = {{collapsible list|bullets=yes
 | title = Members
 | 1 = [[Charles Pugh]] – Council President
 | 2 = [[Gary Brown (Detroit politician)|Gary Brown]] – Council President Pro-Tem
 | 3 = [[JoAnn Watson]]
 | 4 = [[Kenneth Cockrel, Jr.]]
 | 5 = [[Saunteel Jenkins]]
 | 6 = [[Andre Spivey]]
 | 7 = [[James Tate (Detroit politician)|James Tate]]
 | 8 = [[Brenda Jones (Detroit politician)|Brenda Jones]]
 | 9 = [[Kwame Kenyatta]]
 }}
| unit_pref               = Imperial
| area_footnotes          =
| area_magnitude          =
| area_total_sq_mi        = 142.87
| area_total_km2          = 370.03
| area_land_sq_mi         = 138.75
| area_land_km2           = 359.36
| area_water_sq_mi        = 4.12
| area_water_km2          = 10.67
| area_urban_sq_mi        = 1295
| area_metro_sq_mi        = 3913
| elevation_footnotes     =
| elevation_ft            = 600
| population_as_of        = 2011
| population_footnotes    =
| population_total        = 706,585
| population_rank         = [[List of United States cities by population|18th in U.S.]]
| population_urban        = 3,863,924
| population_metro        = 4,285,832 (US: [[List of United States metropolitan statistical areas|13th]])
| population_blank1_title = [[Combined statistical area|CSA]]
| population_blank1       = 5,207,434 (US: [[List of United States combined statistical areas|11th]])
| population_density_sq_mi= {{#expr:713777/138.8 round 0}}
| population_demonym      = Detroiter
| population_note         =
| timezone                = [[Eastern Time Zone (North America)|EST]]
| utc_offset              = −5
| timezone_DST            = [[Eastern Daylight Time|EDT]]
| utc_offset_DST          = −4
| postal_code_type        =
| postal_code             =
| area_code               = [[Area code 313|313]]
| blank_name              = [[Federal Information Processing Standards|FIPS code]]
| blank_info              = {{FIPS|26|22000}}
| blank1_name             = [[Geographic Names Information System|GNIS]] feature ID
| blank1_info             = {{GNIS4|1617959}}, {{GNIS4|1626181}}
| website                 = [http://www.detroitmi.gov/ DetroitMI.gov]
| footnotes               =
}}

Redirects and calls

At least 0 other templates call this one and many templates redirect here.

Supporting templates

The following is a list of sub-templates used by Infobox settlement. See the current list of all sub-templates for documentation, sandboxes, testcases, etc.

  1. {{Infobox settlement/areadisp}}
  2. {{Infobox settlement/densdisp}}
  3. {{Infobox settlement/dunam}}
  4. {{Infobox settlement/dunam/mag}}
  5. {{Infobox settlement/impus}}
  6. {{Infobox settlement/impus/mag}}
  7. {{Infobox settlement/lengthdisp}}
  8. {{Infobox settlement/link}}
  9. {{Infobox settlement/metric}}
  10. {{Infobox settlement/metric/mag}}
  11. {{Infobox settlement/pref}}

Microformat

本模板產生的HTML記號包含了HCard 微格式,能夠讓電腦解析地點名稱和位置,具有可自動將文章分類至適當類別的功能。在HCard中有Geo微格式,能讓電腦分析經緯度資料,因此可在地圖上查詢,或下載至全球定位系統(GPS)裝置。關於微格式的更多使用資訊,請參閱維基百科的微格式專題

hCard 使用以下的 HTML class:

  • adr
  • county-name
  • fn
  • label
  • locality
  • nickname
  • note
  • org
  • vcard

Geo由{{coord}}產生,並使用以下的HTML class:

  • geo
  • latitude
  • longtitude

請勿將這些class更名或刪除。

當指定經緯度數值時,請避免太過詳細。

TemplateData

TemplateData
以下是該模板的模板資料,適用於視覺化編輯器等工具。

Infobox settlement/sandbox模板資料

JSON 語法錯誤。

Tracking categories